Tools
A tool takes one image and does one job to it: make it bigger, cut it out, grow its edges, paint something away. There’s no model to choose and, for most tools, nothing to write — you pick an image, set what little there is to set, and the result is saved to your library beside the original.
That’s what separates tools from the rest of Cauldron. Creating images and Editing images start from a description of what you want. A tool starts from the job.
Some tools are exact — Upscale, Remove background, Vectorize and Resize give the same answer every time for the same image. Others generate new pixels — Enhance, Extend, Erase and Inpaint invent detail or fill, so running them again gives you a fresh take. Each section below says which kind it is.
| Tool | What it does |
|---|---|
| Upscale | Makes an image bigger and sharper. |
| Enhance | Upscales to 2K and generates fine detail. |
| Extend | Grows the canvas past the image’s edges and fills in the new space. |
| Reframe | Crops a batch of images into every social format at once. |
| Erase | Paint over what you don’t want and it’s filled in from what’s around it. |
| Inpaint | Paint over an area and describe what should be there instead. |
| Remove background | Cuts the subject out onto a transparent background. |
| Resize | Sets an exact pixel size or a target file size. Free. Asked for through the assistant rather than a tools page. |
| Vectorize | Turns an image into vector art, an SVG file that stays sharp at any size. |
Find the tools
Section titled “Find the tools”- Sidebar — click Tools to open the index, then pick one. Every tool above except Resize has a card there.
- Pinned tools — select the pin on any card on the Tools page and that tool shows right under Tools in your sidebar. Pins are yours: each person picks their own, separately in each studio, and they stay across sign-ins. Select the pin again to unpin.
- From an image you’re already looking at — open it in the Library and use the Tools row in its detail panel: Reframe, Upscale, Enhance, Extend, Remove BG, Vectorize and Blur. The tool opens with that image already loaded, so there’s nothing to pick. Erase and Inpaint aren’t in that row — open them from the Tools index. Blur and Vectorize are also in the image’s ⋯ menu.
- + Create menu — Upscale, Remove background and Vectorize are listed directly.
- Command palette — press
⌘Kand search for “upscale”, “remove a background” or “vectorize”. - The assistant, or a connected AI tool — see Ask instead of clicking. This is how you reach Resize.
Upscale
Section titled “Upscale”Upscale adds resolution, so an image holds up at a larger size — a product shot printed bigger, a hero image on a wide display, an old asset that was saved small.
It works on images up to 2048 pixels on the longest side. Anything larger is refused, and the message says so before anything runs. That isn’t an arbitrary line: the result is capped at a size a 2048-pixel image already reaches, so a much larger input takes far longer and gains almost nothing. If your image is already that big, it’s already big enough.
An upscale is genuinely hard to see on screen, because both versions are scaled down to fit the window. Use the 100% toggle in the comparison view to look at the result at its real pixel size — that’s where the added detail shows up.
Upscale is exact: running it again on the same image gives you the result you already have.
Enhance
Section titled “Enhance”Enhance upscales to 2K and generates fine detail — skin texture, fabric, foliage — rather than only sharpening what’s there. Reach for it when an image is soft or low on detail, not just small.
Because it generates, it can reinterpret. Two settings shape that:
- Describe the image — a short caption of what’s in the picture. A good caption keeps the added detail faithful.
- Creativity — how much the model may reinterpret. Lower stays close to your image; higher adds more detail and, without a good caption, risks artifacts.
It works on images up to 2048 pixels on the longest side, at least 256 pixels on each side. Every run gives you a fresh result, so if you don’t like one, run it again.
Extend
Section titled “Extend”Extend grows an image past its edges — turn a tight crop into a wider shot, add headroom, or make space for copy. Set how many pixels to add on the Left, Right, Top and Bottom (up to 1024 on each), and say What should appear in the new space.
Describe what belongs there in positive terms (“more white marble countertop”), rather than what doesn’t (“no hands”): the model redraws the whole picture, so a “no …” can remove things from your original too. Leaving it blank can make the model repeat the subject into the new space.
It works on images up to 2048 pixels on the longest side, at least 256 pixels on each side. Every run gives you a fresh result, so run it again for another take. Extending an extended image is fine — that’s how you grow a canvas further.
Reframe
Section titled “Reframe”Reframe works differently from the others: instead of one image in and one out, you select a batch and it crops all of them into social formats — Instagram post, portrait and story, TikTok, YouTube thumbnail, and custom ratios — in one run. It works on originals, and variants land in your library alongside their sources.
Make a slideshow
Section titled “Make a slideshow”Make a slideshow turns a set of images into a short video. Select 2 to 60 images from one brand in the Library and choose Make a slideshow from the selection menu, or from a collection’s menu to use the whole collection. Drag the thumbnails, or use the arrow keys, to change the order.
Pick Seconds per slide (2 by default), turn Crossfade on or off, and choose a Shape: 1:1, 4:5, 9:16 or 16:9. Fill crops each image to the shape; Fit shows the whole image with bars. Save it as an MP4, or as a GIF for places that don’t play video. The preview steps through your slides before anything runs.
The slideshow saves to the brand as a draft video, private or mature if any of its images are. Its Details list the images it was made from. Follow the run in Jobs, and cancel it there if you change your mind; nothing is saved. On a phone it opens as a sheet over the Library.
Add a voice
Section titled “Add a voice”Turn on Narration to have a voice read a script over the slides. Type up to 2,000 characters (about two minutes); the count under the box shows about how long the voice will run. Pick one of six narrators from Narrator, and press play on any of them to hear a sample first.
The narrator starts on the brand’s own narrator, marked brand default; anyone can pick another for their clip. Studio managers set the brand’s narrator in Kit › Voice (see Brands).
Draft it for me
Section titled “Draft it for me”Don’t want to write the script? Press Draft it for me beside Script. Pick a product and a length (15, 30 or 45 seconds, or the clip’s own length on a voiceover), then press Draft script. Cauldron writes the script from the product’s details in the brand’s voice and puts it in the box for you to edit before you run. It starts on the product most of your picked media shows, and leaves out the brand’s banned words. With No product, it writes from the picked media’s captions and names and whatever you’ve typed. If there’s already a script in the box, it asks before replacing it. Drafting is free.
The slides stretch evenly to cover the voice, so the video always runs a second past the last word. If each image would stay up longer than about 8 seconds, you’ll see a note suggesting more images or a shorter script. A narrated slideshow is always an MP4, because a GIF has no sound.
The price shows above Make slideshow before anything runs: about 2 credits for a 30-second script. The slideshow itself is free, and the voice is charged once, after the video is saved. If the voice service won’t read a script, nothing is charged; change the wording, or choose Make it without a voice. The finished video’s Details show the narrator, the voice length and the script, with Copy script.
Add a voiceover
Section titled “Add a voiceover”Add a voiceover puts a voice over any video in your Library. Open the video and press Add a voiceover in the bar above it, or choose it from the ⋯ menu. Type the script, pick a narrator, and press Add voiceover. Under the script you’ll see about how long the voice runs next to the clip’s own length.
If the voice runs longer than the clip, you’ll see a warning, and the last frame holds until the voice ends; the voice is never cut off. The clip’s own sound is replaced by default. If the clip has sound, switch on Keep the clip’s sound to keep it playing quietly under the voice.
The result is a new draft video next to the original, which stays as it was. It’s priced the same way as a narrated slideshow, about 2 credits for a 30-second script, shown before you start and charged once the video is saved. Follow the run in Jobs. On a phone it opens as a sheet over the viewer.
Captions
Section titled “Captions”Narrated videos come with captions, so they still make sense in a feed watched with the sound off. The script appears on screen one sentence at a time, in time with the voice, in the lower third of the picture and clear of the bottom of a 9:16 video, where apps put their own buttons. Long sentences split across a few screens of at most two lines. Captions is on by default in both Make a slideshow and Add a voiceover; switch it off for a clean picture. Captions are free, and the video’s Details say whether they’re on. Re-voice keeps your choice.
Re-voice
Section titled “Re-voice”Heard a word read wrong? Open the narrated video’s Details and press Re-voice in the Narration section. The tool reopens with the same script, narrator and settings, so you only change what’s wrong. Each Re-voice makes a new draft and is charged again; the earlier video stays so you can compare, then archive the one you don’t want. If the original clip or any of the slideshow’s images has been archived or deleted, Re-voice says which and doesn’t run until you restore them.
Make web-ready
Section titled “Make web-ready”Make web-ready turns a heavy GIF or video into small files a website can play. Open a GIF or video in the Library and choose Make web-ready from the tool bench or the ⋯ menu. Pick a Width (the source width by default; it never gets bigger) and, for a video, Pick a moment on the scrubber for the poster, or keep the first frame.
You get an MP4, a WebM and a poster as WebP and JPEG, saved as a new version of the same asset, so it shows under Versions next to the original. Sound is removed, so the result can autoplay and loop on a page. The result shows how much smaller it is and lists each file with its size. Copy embed gives you ready-to-paste code for a looping video with the poster and the sharing tags; it only appears when your studio serves media from a public address. Follow the run in Jobs. On a phone it opens as a sheet over the viewer, and the player stays usable.
Extract frames
Section titled “Extract frames”Extract frames pulls full-size stills out of a video or a GIF. Open one in the Library and choose Extract frames from the tool bench or the ⋯ menu. Under How to pick, choose Evenly spaced (a number of frames spread across the clip, 12 by default), Every few seconds (one frame every so many seconds, 2 by default), or Pick moments (click the timeline to drop a mark, or use Add at playhead; click a mark to remove it). The marks on the timeline and the preview row show exactly which frames you’ll get before anything runs.
Each frame is saved at the video’s full size as a PNG draft, linked back to the video in its Details, and they all land in time order in a new Frames from … collection in the same brand. Frames from a private or mature video stay private or mature. Follow the run in Jobs; if you cancel, the frames already saved stay. On a phone the settings open as a sheet over the viewer.
Erase removes things — a stray cable, a passer-by, a logo you can’t use. Paint over what you don’t want, click Erase, and the area is filled in from what’s around it.
It’s built to be iterative: erase, look, erase again. Each pass is saved to your library on its own, and the strip along the bottom lets you step back to any earlier one. Right after a pass you can Undo pass. While painting, ⌘Z undoes the last stroke, [ and ] change the brush size, and ⌥-drag erases from the selection.
It works on images up to 4096 pixels on the longest side, at least 64 pixels on each side. Erase the same area of the same image twice and you get the pass you already have.
Inpaint
Section titled “Inpaint”Inpaint is Erase’s sibling. Erase fills a painted area from what’s around it; Inpaint fills it with what you describe — swap a mug for a glass, put a jacket on a chair, change the sky. Paint over the area, say What goes there, and click Inpaint. Everything outside your selection stays exactly as it was, and the result keeps the original’s size.
Strength sets how far the new content may depart from what was there, from 0.5 to 1. It starts at 1, which replaces the area outright; lower keeps more of the original’s shapes and colours.
It works the way Erase does: the same brush and shortcuts, passes saved to your library one by one, Undo pass, and the wipe comparison. Run the same selection with the same description again and you get the pass you already have.
It works on images up to 4096 pixels on the longest side, at least 64 pixels on each side.
Blur covers mature content in an image so you can use it where that isn’t allowed. Open an image and choose Blur from the viewer, or from All tools. While the editor opens, it looks for mature areas and draws a box around each one it finds.
Each box says what it is: Found, Unsure (check it, and keep it or remove it), or Added for the ones you draw. Drag on the image to add a box, drag a box to move it, and pull its corner to resize it. Use Brush for shapes a box doesn’t fit. Everything also works from the keyboard: Add box puts a box in the middle, arrow keys move the selected one, Shift with the arrows resizes it, and Delete removes it.
Pick a Style — Blur, Pixelate, or Bar — and a Strength (a bar is solid, so strength doesn’t change it). Pad each area a little blurs just past each edge so nothing peeks out. Compare wipes between the original and the blurred version.
Save copy saves a new image next to the original, named ”…, blurred”, tagged blurred, and marked Made from the original. The original is never changed. If nothing is found, add a box or brush over anything that was missed; saving with nothing marked makes an unchanged copy. Share links of the copy never show the original. Blur is free.
The editor starts from your brand’s default style and strength. Brand managers and studio admins can set it with Save as
To change a blurred copy, open it and choose Edit areas from the viewer or its ⋯ menu. The editor opens with that copy’s boxes, brush and style, and doesn’t search again. Saving replaces the copy: the new one keeps its name and collections, and the old one moves to Archive, where you can restore it. Running Blur on the original again makes a second copy (”…, blurred 2”) instead.
It works on images up to 8192 pixels on the longest side, at least 64 pixels on each side.
Blur a batch
Section titled “Blur a batch”To blur many images at once, select them in the Library and choose Blur… from the bar at the bottom, or choose Blur… from a collection’s ⋯ menu. A batch takes up to 200 images from one brand; videos in the selection are left out. Pick a Style and Strength (they start from the brand’s default), then choose what happens when Cauldron is unsure:
- Save the clear ones, hold the rest for me saves a copy of every image where it found mature areas with confidence, and holds the ones it’s unsure about or found nothing in.
- Hold all for review saves nothing until you’ve looked.
The batch runs in Jobs, so you can close the dialog and keep working. When it finishes with images held, the row shows how many need a look. Choose Review to see just those: click one to open it in the editor with the areas already found, fix them, and Save copy. Save N as they are saves every held image with the areas found so far (an image with nothing found gets an unchanged copy), and Skip these N leaves them without a copy. Held images aren’t saved until you save them.
Remove background
Section titled “Remove background”Remove background cuts the subject out and returns a PNG with real transparency — not a white rectangle. Drop it onto a colored layout, a different photo, or a slide and the background is genuinely gone.
It works on images up to 4096 pixels on the longest side, and each side needs to be at least 256 pixels.
In the comparison view, the result sits on a checkerboard. That’s how you can tell transparent from white. Remove background is exact: running it again on the same image gives you the cutout you already have.
Vectorize
Section titled “Vectorize”Vectorize traces an image into vector art and saves it as an SVG file. Vector art is shapes, not pixels, so it stays sharp at any size: a logo on a business card or a billboard, or opened in a vector editor to change.
It works best on logos, icons and flat art with clear edges and a few solid colors. A photo can be vectorized, but the result is a flat, poster-like version of it rather than a copy.
It works on images up to 4096 pixels on the longest side, and each side needs to be at least 256 pixels. A run costs 2 credits. Vectorize is exact: running it again on the same image gives you the SVG you already have, at no charge.
The result opens in the comparison view like any other tool. Use Download SVG to get the .svg file. An SVG file, or anything Vectorize made, is already vector art, so the Vectorize button is disabled on it. If an image is too detailed to trace into a file of a sensible size, you’re told so and nothing is charged; try a simpler image or a smaller version.
Resize
Section titled “Resize”Resize sets an image to exact pixels — “make this 1200 × 628”, “1080 wide” — or shrinks a file to fit a size limit, like “under 500 KB”. Give one side and the other follows the image’s proportions. For a file-size target, the pixel size never changes: quality comes down until the file fits, and a PNG switches to a reduced color palette first. If it still can’t fit, you’re told the smallest size it reached.
Resize is free and instant — it’s plain pixel math, done here rather than by a model. It works on images up to 4096 pixels on the longest side, at least 16 pixels on each side, and the result can be up to 4096 pixels too.
There’s no Resize page on the Tools index yet. Ask for it from the in-app assistant or a connected AI tool — see below.
Order matters
Section titled “Order matters”Two tools fill transparency in, so run them before Remove background, not after:
- Upscale, Erase or Inpaint the original.
- Remove background from that result.
Upscaling fills a transparent background with white, and Erase and Inpaint return an opaque image, so running any of them on a cutout would silently destroy the cutout. Cauldron refuses that order: the Upscale button is disabled on a cutout in the Library’s Tools row, and the tool explains the ordering if you get there another way.
There’s no way to recover a cutout that’s been flattened, so it’s worth getting the order right the first time.
What happens to your result
Section titled “What happens to your result”Every tool behaves the same way once it finishes:
- It saves itself. There’s no save step and no preview to accept. The moment the result appears, it already exists in your library.
- The original is untouched. The result is a new asset that records the original as its parent. Nothing overwrites anything.
- It lands where the original lives. Same collections, same brand, so it turns up where you’d look for it.
- It’s tagged with the tool that made it, so you can filter for every upscale, cutout or vector later. See Finding assets.
- You get a before/after. Compare with a Wipe slider or Side by side, at Fit or at 100%. The wipe handle works with the arrow keys.
View in library takes you straight to the new asset.
Bring in a file from your desktop
Section titled “Bring in a file from your desktop”You don’t have to upload first. Drag a file onto a tool page, or click Upload, and it’s added to your library as a normal asset before the tool runs. Tools accept PNG, JPG, or WEBP, up to 10 MB.
There’s no throwaway path here: anything you run a tool on is a library asset, with the same brand and collection rules as any other upload. See Uploading files.
Limits at a glance
Section titled “Limits at a glance”If an image is outside these, you’re told which limit it hit before anything runs — you never wait on a job that was going to fail. Every tool takes PNG, JPG, or WEBP up to 10 MB and 16 megapixels.
| Tool | Shortest side, at least | Longest side, at most | Repeat run |
|---|---|---|---|
| Upscale | 32 px | 2048 px | Same result |
| Enhance | 256 px | 2048 px | Fresh result |
| Extend | 256 px | 2048 px | Fresh result |
| Erase | 64 px | 4096 px | New pass each time you paint |
| Inpaint | 64 px | 4096 px | New pass each time you paint |
| Blur | 64 px | 8192 px | Same areas give the copy you already have |
| Remove background | 256 px | 4096 px | Same result |
| Vectorize | 256 px | 4096 px | Same result |
| Resize | 16 px | 4096 px | Same result |
Make a slideshow takes 2 to 60 images from one brand and runs up to 10 minutes (a GIF up to 1 minute). Videos in your selection are left out.
Make web-ready takes any GIF, and videos (MP4, MOV or WebM) up to 10 minutes or 500 MB.
Add a voiceover takes one video up to 10 minutes or 500 MB, and a script up to 2,000 characters.
Extract frames takes one video up to 10 minutes or 500 MB, or a GIF of any length, and saves up to 60 frames a run.
Ask instead of clicking
Section titled “Ask instead of clicking”The in-app assistant can run Upscale, Remove background, Vectorize, Extend and Resize for you. Point it at an image and say “upscale this”, “remove the background”, “vectorize this logo”, “add space on the left” or “make it 1080 wide”.
For the paid ones — Upscale, Remove background, Vectorize and Extend — the assistant shows a card with the cost in credits and the exact source image, and only runs when you approve it. Ask for several at once and you approve them together on one card. Resize is free, so it just runs. Either way, the result is saved to your library exactly as it would be from a tool page.
The same four tools are available to AI tools you’ve connected over MCP, so an outside assistant can upscale, cut out, extend or resize an image in your library on your behalf. See Connected AI tools.
What tools cost
Section titled “What tools cost”Tool runs draw on your studio’s credit balance, the same way generating does, and each tool shows what a run costs in credits before you start it. Enhance, Extend and Inpaint are billed on the seconds they actually use, so their number is an estimate rather than a fixed price.
Resize and Blur are free.
A run that fails isn’t charged. Neither is a repeat run that gives you a result you already have — Upscale or Remove background on the same image again, or the same Erase or Inpaint selection — since nothing re-runs. Enhance and Extend generate something new each time, so each run is charged.
- Upscale before cutting out. It’s the step that cares about the order, and it’s the one that can’t be undone once transparency is gone.
- Upscale or Enhance? Upscale for a bigger, faithful copy; Enhance when the image needs detail it doesn’t have.
- Check at 100%. Judging an upscale at fit-to-window size tells you nothing.
- Start from the Library. Opening a tool from an image’s detail panel skips the picker entirely, and the disabled buttons there tell you what won’t work on that image before you try.
- Erase or Inpaint? Erase when the thing should simply be gone; Inpaint when something specific should take its place.
- Erase in small passes. Several small passes usually beat one big one, and you can step back to any of them.
- Cut out a clear subject. Background removal is strongest when the subject reads as separate from what’s behind it.